Bone china manufacturers talk about the maintenance methods of ceramic water cups

1. Porcelain water cups are fragile products, and should be protected from shock, extrusion, and collision during storage. When appreciating collections, be careful not to collide or drop them, and try not to touch them with sweaty hands. It is best to wear gloves when looking at the collection, and use a flannel cloth to cushion the table. Do not pass each other when viewing the collection. One person should reset it on the table after viewing, and others will hold it for viewing.

2. Porcelain such as bottles, cans, and statues are generally spliced from bottom to top. When moving, you cannot hold the upper part of the neck with one hand. The correct way is to hold the neck with one hand and the bottom with the other. Some bottles, cans, and statues are decorated with two ears, so you should not only lift the ears when taking them out, so as not to break or damage them. Thin-bodied utensils are thin, light, and delicate. Be careful when moving and placing them. Hold the bottom with both hands and avoid using one hand. Especially bottles, which have small feet and a long body, need to be protected from wind.

3. The newly bought high-temperature glaze or underglaze color porcelain should be soaked in clean water for one hour, then wash off the oil stains on the surface with detergent, dry the water with a towel, and put it in a box. Foam padding, and after adding foam, the diameter cannot exceed 0.5 cm of the collection. The collection should be placed in a box with proper tightness, and extrusion should be avoided at the same time to prevent damage to the collection. bone china

4. Unearthed low-temperature glaze and glaze color. A lot of sundries will seep into the glaze, and even the phenomenon of deglazing and decolorization will occur. You should first add a small amount of adhesive between the glazes, and then apply a softer adhesive on the color to prevent the glaze from spreading over a large area. fall off. If it is a high-temperature glaze or underglaze color buried underground for a long time, a lot of calcium and silicon compounds, that is, soil rust, will be produced on the surface of the porcelain. It can be washed once with clean water first, soaked in 3% hydrogen peroxide for about 3 hours, then soaked in clean water for more than 30 hours, and cleaned with a clean white cloth, which can generally remove soil rust. If it cannot be removed, use a brush to dip it in acetic acid and brush it on the soil rust. After 5 hours, use a medical scalpel to cut off the soil rust. The blade can only be cut in one direction. After most of the rust is removed, clean it with a white cloth and toothpaste until the rust is completely removed. This method is only suitable for high-temperature glaze and underglaze color. 

1

Tangshan Winwin Ceramics is a company specializing in the production and processing of ceramic dinnerware, ceramic water cups, ceramic coffee sets and other products, with a complete and scientific quality management system. Always adhering to the tenet of “customer first, quality first, reputation first” and the development concept of “quality is the life of the enterprise, culture is the brand of the enterprise”, it attaches great importance to the innovative combination of traditional ceramic culture inheritance and modern ceramic culture.


Post time: Jun-30-2023

Newsletter

Follow us

  • a1
  • 2
  • 3
  • 1
  • 5